• The tray selected for the print job was opened or closed
Note:
If any of these conditions apply, verify that the Tray Properties information matches the
actual tray contents.
If the stock loaded in the tray does not match the information on the Tray Properties window, then a
message may appear on one or more of the following screens:
• The press User Interface
• The PredictPrint Media Manager application
• The print server
Tip:
Stock or tray mismatch information and how it is displayed is dependent on the individual
print server. If stock is changed in a tray, a message may not be displayed. Therefore it is
important to perform the following steps always before running a print job.
1. Check for a tray mismatch message on the press User Interface. If a mismatch message is
displayed, select it.
A new message displays and explains what media is required and the tray location.
2. Go the print server and check the main or home window for a similar message:
• If a message exists, follow the information provided on the print server to correct the stock
mismatch issue, then continue to the next step.
• If a message does not exist, continue to the next step.
3. Load the stock in the tray.
If the User Interface on the press displays a mismatch message, to correct the mismatch, use the
Stock Wizard.
4. Close the tray.
The Stock Wizard opens.
5. To change the Tray Properties to match the contents of the tray, follow the stock setup steps in
the Stock Wizard.
6. Resolve all tray and stock mismatch messages.
7. Start your print job.
TTeesstt PPrriinntt
The
Test Print
option runs sample prints of the specific stock loaded in a tray. Use these sample prints
to assess whether the loaded stock prints correctly with the selected stock properties, including any
selected
Advanced Stock Setup
options. The test pattern that is used for the sample prints can vary
depending on which
Test Print
option is selected and used.
The
Test Print
option is available with the following features or options:
• Stock Properties
• Advanced Stock Setup
Tips for Using the Test Print Option
Before you use the
Test Print
option, review the following information.
103
