Xerox Versant 4100 Press, User Documentation

Page: 117 / 430

• If the printed output still is not acceptable after repeating procedures and test prints multiple
times, call your Customer Support Center for assistance
U Ussiinngg tthhee TTeesstt PPrriinntt O Oppttiioonn ffrroom m SSttoocckk PPrrooppeerrttiieess
1. Perform one of the following:
• Copy an existing stock entry. Refer to Copying a Stock Entry
• Modify or edit an existing stock entry. Refer to Editing an Existing Stock in the Stock Library
2. From the Stock Properties window, modify the stock attributes as required, including entering a
revised stock name, if applicable, selecting a stock size, color, and other attributes.
3. Select the Test Print button.
The test print window opens.
4. Select the desired Test Print options, including:
• Tray:
• Quantity: It is recommended that you select a quantity of 10 test prints in order to best
evaluate the printed output.
• Sides Imaged:
• 1 Sided-Face Up
• 1 Sided-Face Down
• 2 Sided
• Long Edge Feed or Short Edge Feed:
• Color Mode:
• Black : Select this for black and white only output
• CMYK : Select this for color output
5. Select Start .
An Information window displays stating
Test Print in Progress
.
Upon completion of the test prints, the Information window closes.
6. Retrieve the test prints from the output area of the printer.
7. Review the output.
• If the sample output is acceptable, go the next step.
• If the sample output is not acceptable, repeat the previous steps until acceptable output is
accomplished. If the output remains unacceptable after multiple trials, contact your Customer
Support Center for further assistance.
8. Select OK to save and close the
Stock Properties
window.
9. Select Close to exit the
Stock Library
feature or Tray Properties.
U Ussiinngg tthhee TTeesstt PPrriinntt O Oppttiioonn ffrroom m A Addvvaanncceedd SSttoocckk SSeettuupp
1. Perform one of the following:
• Copy an existing stock entry. Refer to Copying a Stock Entry .
• Modify or edit an existing stock entry. Refer to Editing an Existing Stock in the Stock Library .
2. From the Stock Properties window, select and modify the stock attributes as required, including
entering a new or revised stock name, selecting a stock size, color, and other attributes.
Xerox ® Versant ® 4100 Press
User Documentation
117
Working With