Xerox Versant 4100 Press, User Documentation

Page: 109 / 430

• Copy icon: This option allows the user to copy an existing stock from the Stock Library list, edit
the stock properties, then save it to the Stock Library list as a new stock.
• Delete icon: Select this option to delete a stock from the Stock Library list. Select the stock,
then click the Delete icon.
• Print Barcode icon: This option allows the user to print the barcode of any stock that has a
custom barcode, created using the Stock Wizard. Select the stock, then click the Print Barcode
icon. Before you print a barcode, ensure that you load Letter or A4 size paper in any tray other
than the one you are programming with the stock.
Stock Attributes
For each stock, you can set the following attributes:
Name
Enter a name for the stock. Alphanumeric characters can be used, and symbols, with the exception
of a slash.
MFR
Enter the name of the Manufacturer.
Size
Select the appropriate stock size from the menu. If Custom is selected, enter the customer stock
size information (width, height, and inches or millimeters), then select OK .
Type
Select the stock type from the menu. If Custom is selected, enter the custom type information,
select Add Type , then select Close .
Weight (g/m 2 )
Select the weight of the stock by using the scroll up and down arrows or by clicking inside the field
and typing the weight.
Coated
Select the desired coating from the menu.
Color
Select the desired color for the stock from the menu. If Custom is selected, enter the custom color
information, select Add Color and Close .
Grain: Long Edge Feed and Short Edge Feed (LEF and SEF)
Indicates the orientation of the stock in the tray.
Modulus
Select None or from 2–255 tabs.
Note: When printing tabs, you must set the Modulus option to Precut Tabs.
Hole Punched
If available, select the desired number of holes from the menu. The number of holes is dependent
on the hole-punched stock being used.
Xerox ® Versant ® 4100 Press
User Documentation
109
Working With