Xerox Versant 280 Press, Quick Start Manual

Page: 22 / 44

Cleaning the Press Overview
• Before you start to clean the press, be sure to switch off the power using the rear breaker switch
and unplug the press. Cleaning the press without switching off the power may cause an electric
shock.
• Always use a dry lint-free cloth for all cleaning actions unless otherwise directed.
• Do not use benzene, paint thinner, other volatile liquids, or spray insect repellent on the press as
doing so may discolor, deform, or crack covers.
• If a moistened cloth is used, wipe afterwards with a dry lint-free cloth. Cleaning the press with an
excessive amount of water may cause the press to malfunction and/or damage documents during
printing.
C Clleeaanniinngg tthhee EExxtteerriioorr
1. Wipe the exterior with a soft cloth moistened with water. If dirt is difficult to remove, try gently
wiping with a soft cloth moistened with a small amount of neutral detergent.
2. Wipe off any excess water from the exterior with a soft cloth.
C Clleeaanniinngg tthhee D Dooccuum meenntt C Coovveerr aanndd G Gllaassss
1. Cleaning the document cover
a. Raise the document feeder.
22 Xerox ® Versant ® 280 Press
Quick Start Guide
Maintenance