Replacing Consumable Supplies
The following items are the Customer Replaceable Units (CRU) for the press. It is
recommended that you have a supply of these items available to eliminate down time
when they need to be replaced.
• Dry Ink/Toner cartridges (C, M, Y, K)
• Drum cartridges (C, M, Y, K)
• An empty Waste Dry Ink/Toner bottle
• OHCF feed rolls (all items for OHCF are in one kit)
• Suction Filter
Refer to
for the latest consumable part numbers.
Note
The Fuser Module (Belt, Pressure Roll, Stripper Fingers, and PR Cleaning Pad) may be
replaced by the customer only if directed to do so by Service.
Note
Store supply items and Xerox parts in their original packages in a convenient location.
Always recycle/dispose the used CRU according to the disposal instructions supplied
with the new CRU.
Replacing the (OHCF) Bypass Tray Feed Rolls
Tip
The feed rolls for OHCF bypass tray should be replaced when experiencing frequent
multifeeds, single feeds, or blank prints in the stack of the output prints.
Use this procedure to replace the (OHCF) bypass tray feed rolls, which includes:
• Feed Roll
• Nudger Roll
• Retard Roll
Note
After you replace all of the feed rolls, contact your system administrator who will reset
the HFSI usuage counter for these CRU components to zero (0).
1. Locate and access the Bypass Tray on top of the OHCF.
Xerox
®
Versant™ 2100 Press
5-2
Quick Start Guide
Maintenance
