Xerox Versant 180 Press, User Manual

Page: 19 / 166

3. If there is a loss of power and it is not possible to access the Machine Status screen,
the press serial number can also be found on the inside frame of the press near the
Paper Tray 1 drawer:
a) At the press, fully open Tray 1.
b) At the left of the tray, on the press frame, locate the plate with the serial number
(SER#).
User Interface (UI)
1 Touch Screen
Directly touch the screen to select and set features. Displays instructional and
informational messages, fault clearance procedures and general press information.
2 Home button
Press this button to display the main window. Provides access to features such as Copy,
E-Mail, and Network Scanning, just to name a few features. Other features may be
available depending on your marketplace.
3 Services
This button lights when the main power is on.
4 Job Status button
Use to check the progress of active jobs and detailed information about completed
jobs or pending jobs. This area also allows you to delete a job (cancel printing or copying)
and pause jobs.
5 Machine Status button
Use to access the Tools feature, check the press configuration, the software version,
the press billing meters and counter information, and to access and print job history
or error reports.
6 Log In/Out button
Use to log in and out of Administrator mode or Authentication mode with user ID and
password.
2-3 Xerox ® Versant ® 180 Press
User Guide
Getting Started