WSD
Web Services for Devices (WSD) is technology from Microsoft that provides a standard method for
discovering and using network connected devices. It is supported in Windows Vista, Windows Server
2008, and newer operating systems. WSD is one of several supported communication protocols.
Note:
To use WSD Scan services, ensure that your computer is set up to receive scans using
WSD Scan services.
EEnnaabblliinngg W
WSSD
D
1. In the Embedded Web Server, log in as administrator, then click
Connectivity
.
2. In the Protocols area, click
WSD (Web Services on Devices)
.
3. To enable WSD for scanning services, for WSD Scan, enable the toggle button.
4. To enable WSD for printing services, for WSD Print, enable the toggle button.
5. For Port Number, type a port number or TCP/IP socket number.
6. For PJL, enable the toggle button.
7. Click
Print Mode
, then select an option.
8. Click
TBCP Filter
, then select
Enabled
or
Disabled
.
9. For Data Reception Timeout, type the amount of time to wait before the data receiving
connection times out. The default is 30 seconds.
10. For Notification Delivery Timeout, type the amount of time to wait before the delivery notification
connection times out. The default is 8 seconds.
11. For Maximum IP Packet TTL, type a value for the maximum number of hops.
12. To load balance the number of subscribers, for Maximum Number of Subscribers, type a number.
The default is 50.
13. Click
OK
.
66
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
