Energy Saving Settings
C
Coonnffiigguurriinngg PPoow
weerr SSaavveerr U
Ussiinngg tthhee EEm
mbbeeddddeedd W
Weebb
SSeerrvveerr
You can set the time the printer spends idle in ready mode before it automatically transitions to a
lower power level.
To configure Power Saver Timeouts:
1. In the Embedded Web Server, click
System
.
2. Click
Power Saver
.
3. To set the delay before the printer enters Low-Power mode, for
Low Power Timeout
, enter the
number of minutes.
4. To set the delay before the printer enters Sleep mode, for
Sleep Timeout
, enter the number of
minutes.
Note:
Set the timeouts so that the sum of both is within 60 minutes.
5. Click
Auto Power Off
, then select an option.
6. Click
OK
.
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
161
