Xerox VersaLink C7000 User Manual Download Page 148

Page: 148 / 210

Moving the Printer

Before you move the printer:

• Ensure that you always power off the printer and wait for it to shut down completely.

• Ensure that no jobs are in the print queue.

• Disconnect the power cord and other cables from the back of the printer.

WARNING:

To prevent electric shock, never touch the power plug with wet hands. When

removing the power cord, ensure that you pull the plug and not the cord. Pulling the cord can

damage it, which can lead to fire or electric shock.

Note:

• When moving the printer, do not tilt it more than 10 degrees in any direction. Tilting the

printer more than 10 degrees can cause toner spillage.

• When moving the printer over a long distance, remove the drum cartridge and toner

cartridge to prevent toner from spilling.

Caution:

Do not expose the drum cartridge to direct sunlight or strong indoor fluorescent

lighting. Do not touch or scratch the surface of the drum.

Caution:

Failure to repackage the printer properly for shipment can result in damage not

covered by the Xerox

Warranty, Service Agreement, or Total Satisfaction Guarantee. The

Xerox

Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover damage to

the printer caused by improper moving.

After moving the printer:

1. Reinstall any parts that you removed.

2. Reconnect the printer to the cables and power cord.

3. Plug in and power on the printer.

148

Xerox

VersaLink

C7000 Color Printer

User Guide

Maintenance

Summary of Contents for VersaLink C7000



















































































































































































































Search results

Summary of Contents for VersaLink C7000

Reviews:

Related manuals for VersaLink C7000

Brands by name

Popular brands

Xerox VersaLink C7000, User Manual

Search results

Summary of Contents for VersaLink C7000

Reviews:

Related manuals for VersaLink C7000

Brands by name

Popular brands