Xerox VersaLink C415, User Manual

Page: 39 / 336

Power Options
P O W E R S AV E R
To reduce standby power consumption, you can use Sleep Timeout to set the time that the printer spends idle in
Ready mode before the printer transitions to Sleep Mode.
P O W E R I N G O N T H E P R I N T E R O R E X I T I N G S L E E P M O D E
The printer has one power switch. The power switch is the Power/Wake button on the control panel. The Power/
Wake button controls power to the printer electronic components, and when powering off, it initiates a software-
controlled shutdown procedure. The preferred method to power on and off the printer is to use the Power/Wake
button.
• To power on the printer, on the printer control panel, press the PPoow weerr//W Waakkee button.
• To enter or exit Sleep Mode, press the PPoow weerr//W Waakkee button.
Note:
• When the printer receives data from a connected device, the printer exits Sleep Mode automatically.
• When the printer receives data from a network print job, to reduce power consumption, only necessary
electronic components exit Sleep mode automatically. The control panel and the document scanner do
not exit Sleep Mode.
• When the printer is in Sleep Mode, the touch screen is powered off and unresponsive. To wake the printer
manually, press the PPoow weerr//W Waakkee button.
• If Auto Power Off is enabled, the printer powers off automatically after the specified conditions are met.
To enable Auto Power Off mode, contact your System Administrator. For details, refer to the System
Administrator Guide at www.xerox.com/office/VLC415docs .
W Waarrnniinngg::
The main power outlet is at the rear side of the printer. Do not plug or unplug the power cord
while the printer is powered on.
Xerox
®
VersaLink
®
C415 Color Multifunction Printer User Guide
39
Getting Started