Xerox VersaLink C415, User Manual

Page: 23 / 336

Maintenance Safety
Do not attempt any maintenance procedure that is not specifically described in the documentation supplied with
your printer.
• Clean with a dry lint-free cloth only.
• Use supplies and cleaning materials only as directed.
C Caauuttiioonn::
Do not use aerosol cleaners. Aerosol cleaners can cause explosions or fires when used on
electromechanical equipment.
• Do not remove the covers or guards that are fastened with screws. Customer service items are not located
behind these covers.
• In case of a Dry Ink or Toner Spill, use a broom or a wet cloth to wipe off spilled dry ink/toner. Sweep slowly to
minimize generation of dust during clean up. Avoid using a vacuum. If a vacuum must be used, the unit should
be designed for combustible dusts, with an explosion rated motor and non-conductive hose.
C Caauuttiioonn::
The metallic surfaces in the fuser area are hot. Use caution when removing paper jams
from this area and avoid touching any metallic surfaces.
• Do not burn any consumables or routine maintenance items. For information on Xerox ® supplies recycling
programs, go to www.xerox.com/gwa .
Xerox
®
VersaLink
®
C415 Color Multifunction Printer User Guide
23
Safety