Getting Started
Xerox
®
VersaLink
®
C400 Color Printer
33
User Guide
Connecting to a Computer Using USB
•
Windows 7, Windows 8.1, Windows Server
2008, Windows 10, Windows
Server
2008 R2, and
Windows Server 2012.
•
Macintosh OS X version 10.9 and later.
•
UNIX and Linux: Your printer supports connection to various UNIX platforms through the
network interface.
To connect the printer to the computer using a USB cable:
1.
Connect the
B
end of a standard A/B USB 2.0 or USB 3.0 cable to the USB Port on the back of
the printer.
2.
Connect the
A
end of the USB cable to the USB port on the computer.
3.
If the Windows Found New Hardware Wizard appears, cancel it.
4.
Install the print driver.
For more information, refer to
Installing the Software
on page 41.
Connecting to a Wired Network
1.
Ensure that the printer is powered off.
2.
Attach a Category 5 or better Ethernet cable from the printer to the network or router socket.
Use
an Ethernet switch or router, and two or more Ethernet cables. Connect the computer to the
switch or router with one cable, then connect the printer to the switch or router with the second
cable. Connect to any port on the switch or router except the uplink port.
3.
Attach the power cord, then plug in the printer and turn it on.
4.
Set the network IP printer address, or set up the printer for automatic printer IP detection. For more
information, refer to the
System Administrator Guide
www.xerox.com/office/VLC400docs
