Xerox VersaLink B71 Series User Manual Download Page 184

Page: 184 / 302

The control panel displays the Paper Settings.

• To select a new envelope size, touch SSiizzee.

• To select a new paper color, touch C

Coolloorr.

Note: When you select an envelope size, the paper type defaults to Envelope.

To confirm the settings, touch C

Coonnffiirrm

L A B E L S

You can print labels from any tray.

Guidelines for Printing Labels

• Use labels designed for laser printing.

• Do not use vinyl labels.

• Do not feed a sheet of labels through the printer more than once.

• Do not use dry gum labels.

• Print only on one side of the sheet of labels. Use full-sheet labels only.

• Store unused labels flat in their original packaging. Leave the label sheets inside the original packaging until

ready to use. Return any unused label sheets to the original packaging and reseal it.

• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing labels in

extreme conditions can cause print-quality problems or cause labels to jam in the printer.

• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and jam in the

printer.

• In the print driver software, select Label as the paper type.

• Before loading labels, remove all other paper from the tray.

Waarrnniinngg::

Do not use any sheet where labels are missing, curled, or pulled away from the backing sheet.

It could damage the printer.

Loading Labels in Trays 1 and 2

Pull out the tray until it stops.

184

Xerox

VersaLink

B71XX Series Multifunction Printer User Guide

Paper and Media

Summary of Contents for VersaLink B71 Series















































































































































































































































































































Search results

Summary of Contents for VersaLink B71 Series

Reviews:

Related manuals for VersaLink B71 Series

Brands by name

Popular brands

Xerox VersaLink B71 Series, User Manual

Search results

Summary of Contents for VersaLink B71 Series

Reviews:

Related manuals for VersaLink B71 Series

Brands by name

Popular brands