Xerox VersaLink B7025 User Manual Download Page 201

Page: 201 / 281

Troubleshooting

Xerox

VersaLink

B7025/B7030/B7035 Multifunction Printer 201

User Guide

Printer Resets or Powers Off Frequently

Probable Causes

Solutions

The power cord is not plugged into the outlet

correctly.

Power off the printer, confirm that the power cord is plugged

in correctly to the printer and the outlet, then power on the

printer.

The power cord is not secured in place

correctly.

Use the bracket provided with the printer to secure the power

cord in place.

A system error occurred.

Power off the printer, then power on again. Print the Error

History Report. For details, refer to

Printing the Error History

Report

on page 237. If the error persists, contact your Xerox

representative.

The printer is connected to an uninterruptible

power supply.

Power off the printer, then connect the power cord to a

suitable outlet.

The printer is connected to a power strip

shared with other high-power devices.

Plug the printer directly into the outlet or into a power strip

that is not shared with other devices.

Printer Does Not Print

Probable Causes

Solutions

The printer is in Power Saver mode.

On the control panel, press the

Power/Wake

button.

The printer has an error.

If the Status LED is blinking amber, follow the instructions on

the control panel to clear the error. If the error persists,

contact your Xerox representative.

The printer is out of paper.

Load paper into the tray.

A toner cartridge is empty.

Replace the empty toner cartridge.

The drum cartridge has reached end of life.

Replace the drum cartridge.

No control panel indicators are lit.

Power off the printer, confirm that the power cord is plugged

in correctly to the printer and the outlet, then power on the

printer. If the error persists, contact your Xerox representative.

The printer is busy.

•

If the Status LED is flashing blue, a previous print job

could be the problem.
a. At your computer, use the printer properties to delete

all print jobs in the print queue.

b. At the control panel, touch

Jobs

, then delete all

pending print jobs.

•

Load the paper in the tray.

•

If the Status LED does not flash once after you send a

print job, check the connection between the printer and

the computer. Power off the printer, then turn it on again.

Summary of Contents for VersaLink B7025


























































































































































































































































































Search results

Summary of Contents for VersaLink B7025

Reviews:

Related manuals for VersaLink B7025

Brands by name

Popular brands

Xerox VersaLink B7025, User Manual

Search results

Summary of Contents for VersaLink B7025

Reviews:

Related manuals for VersaLink B7025

Brands by name

Popular brands