Maintenance
Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer 195
User Guide
6. To adjust the registration, touch
Lead/Side Registration
.
a. To adjust the side-to-side registration, for
Side Registration
, touch Plus (
+
) or Minus (
-
).
b. To adjust the top-to-bottom registration, for
Lead Registration
, touch Plus (
+
) or Minus (
-
).
For reference, position the chart so that Side-1 or Side-2 dots are at the bottom of the page.
•
For Lead Registration, a positive value shifts the image down the page.
•
For Side Registration, a positive value shifts the image to the left.
7. To save your settings, touch
OK
.
8. As needed, repeat steps 4 through 6 to enter additional values.
9. Print another sample page, then repeat the process until you complete the registration corrections.
10. To return to the Home screen, press the
Home
button.
Adjusting the Altitude
You can use Adjust Altitude to set the altitude to match the printer location. If the altitude setting is
incorrect, it can cause print-quality problems.
To adjust the altitude:
1. At the printer control panel, press the
Home
button.
2. Touch
Device
>
Support
>
Altitude Adjustment
.
3. Touch the altitude of the location of the printer, then touch
OK
.
4. To return to the Home screen, press the
Home
button.
