Xerox VersaLink B605, User Manual, Page: 219 / 273

• Use only Xerox-approved paper. For more information, refer to Supported Paper .
• Use only dry, undamaged paper.
Caution: Some paper and other media types can cause poor output quality, increased
paper jams, or damage your printer. Do not use the following:
– Rough or porous paper
– Inkjet paper
– Paper that is photocopied
– Paper that is folded or wrinkled
– Paper with cutouts or perforations
– Stapled paper
– Envelopes with windows, metal clasps, side seams, or adhesives with release strips
– Padded envelopes
– Plastic media
– Transparencies
• Ensure that the paper type selected in your print driver matches the paper type on which you are
printing.
• If you have the same size paper loaded in more than one tray, ensure that the proper tray is
selected in the print driver.
• Store your paper and other media properly for optimum print quality. For more information, refer
to Paper Storage Guidelines .
SSoollvviinngg PPrriinntt--Q Quuaalliittyy PPrroobblleem mss
When the print quality is poor, select the closest symptom from the following table, then refer to the
corresponding solution to correct the problem. You can also print a Demonstration Printpage to more
precisely determine the print-quality problem. For more information, refer to
Information Pages .
If the print quality does not improve after performing the appropriate action, contact your Xerox
representative.
Note: To maintain print quality, the toner cartridge is designed to provide a warning message
when the toner level is low. When the toner cartridge reaches this level, a warning message
appears. When the toner cartridge is empty, another message prompts you to replace the toner
cartridge. The printer stops printing until you install a new toner cartridge.
Xerox ® VersaLink ® B605/B615 Multifunction Printer
User Guide
219
Troubleshooting