Xerox VersaLink B605 User Manual Download Page 215

Page: 215 / 273

Clleeaarriinngg PPaappeerr JJaam

mss ffrroom

m tthhee M

Maaiillbbooxx

To resolve the error displayed on the control panel, clear all paper from the paper path.

1. At the back of the printer, locate the Mailbox jam-access door. Open the door, then remove any

jammed paper.

2. Close the jam-access door. To clear any remaining errors, follow the instructions on the control

panel.

TTrroouubblleesshhoooottiinngg PPaappeerr JJaam

mss

Muullttiippllee SShheeeettss PPuulllleedd TTooggeetthheerr

Probable Causes

Solutions

The paper tray is too full.

Remove some of the paper. Do not load paper past
MAX fill line.

The edges of the paper are not even.

Remove the paper, align the edges, and then reload
it.

The paper is moist from humidity.

Remove the paper from the tray. Load new, dry paper
parer into the tray..

Too much static electricity is present.

Load a new ream of paper.

Using unsupported paper.

Use only Xerox

-approved paper. For more

information, refer to

Supported Paper

The feed rollers are dirty.

With a clean, lint-free cloth moistened with water,
wipe the feed rollers until they are clean. For more
information, refer to

Cleaning the Printer

Xerox

VersaLink

B605/B615 Multifunction Printer

User Guide

215

Troubleshooting

Summary of Contents for VersaLink B605


















































































































































































































































































Search results

Summary of Contents for VersaLink B605

Reviews:

Xerox VersaLink B605, User Manual, Page: 215 / 273

Search results

Summary of Contents for VersaLink B605

Reviews: