![background image](http://html2.mh-extra.com/html/xerox/versalink-b605/versalink-b605_reference-manual_4199889009.webp)
Safety
Xerox
®
VersaLink
®
B605/B615 Multifunction Printer Safety, Regulatory, Recycling, and Disposal
9
Reference Guide
Operational Safety
Your printer and supplies were designed and tested to meet strict safety requirements. These include
safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation of your
printer.
Operational Guidelines
•
Do not remove any trays when the printer is printing.
•
Do not open the doors when the printer is printing.
•
Do not move the printer when it is printing.
•
Keep hands, hair, neckties, and so on, away from the exit and feed rollers.
•
Covers, which require tools for removal, protect the hazard areas within the printer. Do not remove
the protective covers.
•
Do not override any electrical or mechanical interlock devices.
•
Do not attempt to remove paper that is jammed deeply inside the printer. Switch off the printer
promptly and contact your local Xerox representative.
WARNINGS:
•
The metallic surfaces in the fuser area are hot. Always use caution when removing paper
jams from this area and avoid touching any metallic surfaces.
•
To avoid a tip hazard, do not push or move the device with all the paper trays extended.
Ozone Release
This printer produces ozone during normal operation. The amount of ozone produced is dependent on
copy volume. Ozone is heavier than air and is not produced in amounts large enough to harm anyone.
Install the printer in a well-ventilated room.
For more information in the United States and Canada, go to
. In other
markets, please contact your local Xerox representative or go to
Summary of Contents for VersaLink B605
Page 16: ......