Xerox
®
Apps
Xerox
®
VersaLink
®
B405 Multifunction Printer
85
User Guide
4.
Select one of the following options.
−
Off
: This option is the default setting.
−
Auto Center
: This option centers the image on the page.
−
Snap to Edge
: This option shifts the image to the edge of the document. Select one of the
image-position options.
•
Mirror Side 1
: This option allows you to set the Image Shift for Side 1, and matches the
Side 2 Image Shift accordingly. To move the image to the required edge of the page,
touch the appropriate arrow.
•
Independent Sides
: This option allows you to position the images on Side 1 and Side 2
independently of each other. To move each image to the required edge of the page, touch
the appropriate arrow.
−
Manual
: This option allows you to specify the amount of Image Shift required. Select one of
the image-position options.
•
Mirror Side 1
: This option allows you to set the Image Shift for Side 1, and matches the
Side 2 Image Shift accordingly. Touch the appropriate fields. To adjust the image shift,
move the slider.
•
Independent Sides
: This option allows you to position the images on Side 1 and Side 2
independently of each other. Touch the appropriate fields. To adjust the image shift, move
the slider.
5.
To specify the orientation of the original document, touch
Original Orientation
, then select an
option.
6.
Touch
OK
.
Creating a Booklet
The booklet feature reduces the original page images to fit two images on each side of the printed page.
You can print copies in booklet format.
Notes:
•
This function is available on printers with an optional Productivity Kit installed only.
•
In Booklet mode, the printer scans all of the original documents before it prints the copies.
To create a booklet:
1.
At the printer control panel, press the
Home
button.
2.
Touch
Copy
.
3.
Touch
Booklet Creation
.
Note:
If
Reduce/Enlarge
has been adjusted, a message appears confirming that
Reduce/Enlarge
has changed to
Auto%
. If
Paper Supply
has been set to
Auto Select
, a message appears confirming
that
Paper Supply
has changed to
Tray 1
.
4.
Touch the
Booklet Creation
toggle button.
