Xerox
®
Apps
84
Xerox
®
VersaLink
®
B405 Multifunction Printer
User Guide
Book Copying
You can use the Book Copying feature to copy books, magazines, or other bound documents. You can
use this feature to copy images for different results.
•
Copy either the left or right page onto a single sheet of paper
•
Copy both the left and right pages onto two sheets of paper
•
Copy both the left and right pages as a single image onto one sheet of paper
Note:
To make copies from books, magazines, or other bound documents, use the document glass
only. Do not place bound original documents in the document feeder.
To set up book copying:
1.
At the printer control panel, press the
Home
button.
2.
Touch
Copy
.
3.
Touch
Book Copying
.
4.
Touch
Mode
, then select one of the following options:
−
Off
: This option is the default setting.
−
Both Pages
: This option scans both pages of an open book onto two sheets of paper.
−
Left/Right Page Only
: This option scans the left or right page of an open book onto a single
sheet of paper.
5.
If Binding Edge Erase is required, touch
Binding Edge Erase
, then move the slider to the right to
erase up to 50 mm (1.97 in).
6.
Touch
OK
.
Shifting the Image
You can change the placement of an image on the copy page. This is useful if the image is smaller than
the page size.For image shift to work correctly, position original documents as follows:
•
Document Feeder
: Position original documents face up, short edge entering the feeder first.
•
Document Glass
: Position original documents face down, in the upper-left corner of the document
glass, short edge to the left.
To change the placement of the image:
1.
At the printer control panel, press the
Home
button.
2.
Touch
Copy
.
3.
Touch
Image Shift
.
