Xerox PrimeLink B9100, User Manual

Page: 76 / 484

D E L E T E O U T S I D E / D E L E T E I N S I D E
1. At the control panel, on the Services Home screen, touch C Cooppyy, then touch the JJoobb A Asssseem mbbllyy tab.
2. Touch D Deelleettee O Ouuttssiiddee//D Deelleettee IInnssiiddee.
3. Touch D Deelleettee O Ouuttssiiddee or D Deelleettee IInnssiiddee.
4. If the original documents are 2-sided, select the applicable delete option:
• Both Sides
• Side 1 Only
• Side 2 Only
5. Touch A Arreeaa 11.
6. To define a specific area, enter the two XY coordinates within a range of 0.0–431.8 mm (0.0–17.0 in.). To
navigate from coordinate to coordinate, touch each X and Y setting:
a. To enter the value for Y1, touch the Y1 box. To enter a number range, use the numeric keypad.
b. To enter the value for Y2, touch the Y2 box. To enter a number range, use the numeric keypad.
c. To enter the value for X1, touch the X1 box. To enter a number range, use the numeric keypad.
d. To enter the value for X2, touch the X2 box. To enter a number range, use the numeric keypad.
To clear a deletion area, touch C Clleeaarr A Arreeaa XX, then use the numeric keypad and press 11, 22, or 33.
7. Touch SSaavvee.
8. Touch SSaavvee again.
9. Enter the Q Quuaannttiittyy, then press the green SSttaarrtt button.
S TO R E D P R O G R A M M I N G
You can save frequently used features and job settings as Stored Programming, then access the settings using a
shortcut button. For more information, refer to
Stored Programming .
The Stored Programming option not only remembers feature settings, but the option can record a series of
operations. This feature enables you to record the hierarchy of displayed screens for each step. For example, you
could use Stored Programming to record the following actions: Press the M
Maacchhiinnee SSttaattuuss button, and display the
Print Reports screen to print reports.
• You can record up to 100 consecutive operations in each stored program.
• Store up to 40 programs.
• You cannot use the Build Job option with the Stored Programming option.
• There are situations where a stored program becomes invalid:
– When default values or paper tray settings are changed in the system setting, a stored program becomes
invalid.
– When buttons are added or removed from the touch screen, a stored program becomes invalid. The Stored
Programming feature remembers the location only of a button on the screen, not the name of the button.
For example, button positions can change when a job flow or job template is added or deleted.
76
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
Copying