Xerox PrimeLink B9100, User Manual

Page: 355 / 484

I N S E RT E R FA U LT M E S S A G E S
When faults occur, such as paper jams, open doors or covers, or a printer malfunction, the printer stops printing,
then a message appears on the printer touch screen. An illustration shows the location of the fault with a brief
explanation of corrective actions for clearing the fault. If a fault occurs in more than one location, the illustration
changes to indicate the multiple locations and the required corrective actions.
The touch screen displays a Faults button that provides information about the fault and detailed instructions for
correcting the fault. The (E) code on the upper-left part of the Fault message displays which error indicator, E1, E2,
or E3, is illuminated on the inserter control panel.
Inserter Fault Code Information
When faults occur, such as paper jams, open doors or covers, or a printer malfunction, the printer stops printing, and
a message appears on the printer touch screen.
The touch screen displays a Faults button that provides information about the fault and detailed instructions for
correcting the fault.
Tip: Inserter faults are identified by the codes that start with the three-digit numbers
012
,
013
, and
024
.
Xerox
®
PrimeLink
®
B9100/B9110/B9125/B9136 Copier/Printer User Guide
355
Inserter Module