Xerox Phaser EX7750, Printing Manual

Page: 55 / 132

3
3-1 Printing to the EX7750
You can print to the EX7750 directly from UNIX workstations. Jobs printed to the
EX7750 are sent to the Print or Hold queues and can be manipulated from Command
WorkStation/Command WorkStation LE, or from Windows and Mac OS computers
on the network using Fiery Spooler.
N
OTE
:
If you print to the Hold queue, an operator must intervene from Command
WorkStation/Command WorkStation LE or Fiery Spooler for the job to print; jobs
sent to the Hold queue are spooled to disk and held.
For more information about using Command WorkStation/Command WorkStation
LE or Fiery Spooler, see the
Job Management Guide .
The queue name and EX7750 printer name are determined by your system
administrator. Contact your system administrator for the names of your queues.
For information about setting up printing from TCP/IP, see your UNIX system
documentation.
Printing to the EX7750
You can use UNIX commands to print PostScript and text files to the EX7750. In
general, use basic print commands (lpr, lpq, lprm) to send print jobs to the EX7750.
For information about UNIX commands, see the UNIX manual pages or other
documentation.
N
OTE
:
Only PostScript and ASCII text files can be printed from UNIX.
Chapter 3:
Printing
from UNIX
Workstations