Xerox Phaser EX7750, Printing Manual

Page: 106 / 132

A
A-12 Print Options
Spot Color Matching
Printer’s default/Off/On
Select Off to print specified PANTONE
colors in your job using the current
CMYK Simulation and CMYK
Simulation Method.
Select On to activate the PANTONE
Lookup Table. The EX7750 prints
specified PANTONE colors in your job
by matching the CMYK print blend to
the same color from the PANTONE
library. The Printer’s default setting reflects the
setting specified in EX7750 Setup.
For Windows, choose Expert Color as the
Color Mode to access this option.
For more information, see the
Color Guide .
This option is not supported for PCL.
Stapler Mode
Off/Front/Rear/Dual
Specify whether and where to staple
the job.
Transparency Interleaving
Off/Blank Interleave
Select Blank Interleave to print multiple
transparency sheets separated by blank,
plain paper pages.
Tray Alignment
Printer’s default/Enable/Disable
Specify if you want to enable tray
alignment. If this option is set to Enable, the Input
Tray option cannot be set to AutoSelect
at the printer.
For more information, see the
Job
Management Guide .
This option is not supported for PCL.
Use Master
None/1-15
For variable data print jobs, specify a
FreeForm master number to be used for
the job. For more information, see page 5-2 .
Command WorkStation/Command
WorkStation LE allows you to select up
to 100 FreeForm Masters.
This option is not supported for PCL.
Option and settings
(default setting is underlined)
Description
Requirements, constraints,
and information