Xerox Phaser EX7750, Configuration Manual, Page: 64 / 220

4
4-4 Performing Setup from the Control Panel
Buttons
Line selection
buttons Use these buttons to select the command displayed on the
corresponding line of the display window. When a button is
active, a special character (
> ) appears in the display window
next to the button.
Up and down
arrow buttons Use these buttons to scroll to different screens in
multi-screen lists, select Setup options from a list of available
options, and scroll through alphanumeric characters.
Menu button Press this button to view other screens. Under normal
operation, the Control Panel displays the Info, RIP, or Print
Status screen with information about the status of the
EX7750. If you press the Menu button, the Functions menu
is displayed and you can perform additional operations (see
“Functions menu” on page 4-7). If a job is processing or
printing, press the Menu button to cycle among the
active screens.
Power button Press this button to turn the EX7750 on and off.
Reset button Press this button to restart the EX7750 after you choose Shut
Down System from the Shut Down menu.