Xerox Phaser EX7750, Configuration Manual

Page: 54 / 220

3
3-8 Preparing for EX7750 Setup
EX7750 system software
The EX7750 uses Windows XP Embedded system architecture to receive and process
jobs and send job data to the printer. To log on to the EX7750, enter
Administrator
as
the user name, and enter the password “ Fiery.1 ”.
Resident on the Windows XP software is the following software unique to
the EX7750:
• Server—The Server is an independent software process started automatically
whenever Windows XP is started. As the central element of EX7750 system
software, the Server process controls the spooling, rasterizing, and printing of jobs,
as well as job accounting (the Job Log), storage, and retrieval.
When the Server is not running, jobs cannot be received by the EX7750, job
processing cannot occur, job data cannot be transferred to the printer for printing,
and the job management tools cannot connect to the EX7750. In the event that you
need to restart the Server process, right-click FieryBar and choose Restart Fiery.
• Command WorkStation—Command WorkStation is the interface tool for the
Server. It provides a graphical interface for viewing and controlling Server functions.
For information about installing system software, see page 7-6 .
About Setup
Setup configures the EX7750 to communicate with other devices and manage print
jobs. You must perform Setup the first time you turn on the EX7750 after new system
software is loaded. An initial Setup using default settings is adequate for allowing users
to print to the EX7750 and use the WebTools. When your network or user printing
environment changes, you can change Setup options accordingly.