Xerox Phaser EX7750, Configuration Manual, Page: 168 / 220

5
5-50 Setting up the EX7750 from a Windows Computer
Exiting Setup
When you finish specifying Setup options in local Setup, click OK and close the Setup
dialog box. You are notified that the EX7750 must be restarted for the new settings to
take effect. You can restart now or later. To restart, choose the Restart Fiery command
in the FieryBar menu. If you changed the network configuration or other settings
affecting the Windows XP software, you must restart Windows XP by choosing
Start > Shut Down at the Taskbar for those changes to take effect.
When you finish specifying Setup options in remote Setup, click Save and then Reboot
Server for the new settings to take effect. The EX7750 reboots, and all the changes take
effect. If Command WorkStation is running, the connection to the EX7750 is lost and
you must log on again when the server has
restarted.
After you have completed Setup and restarted the EX7750 for the first time, install the
user software for printing on remote workstations, as described in the
User Software
Installation Guide . To confirm the network connection and your Setup, print a test job
from a remote workstation.