Xerox Phaser EX7750, Configuration Manual

Page: 164 / 220

5
5-46 Setting up the EX7750 from a Windows Computer
Color Setup
Color options can be set only from local Setup. If you do not have the FACI installed,
change the PCL options on the EX7750 Control Panel as described in
“Color Setup
options” on page 4-50. For more information about settings for color options, see the
Color Guide and Appendix A of the Printing Guide .
The color job defaults can be overridden on a job-by-job basis.
• A user can specify a different setting at print time from the printer driver.
• An administrator or operator can specify a different setting from the job
management tools after the job has been sent to the EX7750.
N
OTE
:
In the following illustration, “Device name” represents the model of the printer
connected to the EX7750, which is
EX7550
.