System Administrator Guide
A-1
The printer has a configuration card that stores network parameters and configuration (N, DN,
DX, etc.) data. The configuration card is hot swappable, enabling you to share or replace it,
providing an alternative to on-site service.
Network settings are saved on the configuration card. If the configuration card is removed
from an old printer and inserted into a new printer, the saved settings on the configuration card
are copied to the new printer when it is powered on. The new printer assumes the identity of
the old printer, eliminating the need to reconfigure network settings.
This appendix includes:
■
General Information Parameters
on page A-2
■
PostScript Parameters
on page A-2
■
PCL Parameters
on page A-3
■
USB 2.0 Parameters
on page A-3
■
Hard Drive Parameters
on page A-3
■
Network Information Parameters
on page A-3
■
PhaserShare Series B Interface for Ethernet Network Parameters
on page A-3
■
EtherTalk Parameters
on page A-4
■
TCP/IP Parameters
on page A-4
■
DNS Parameters
on page A-4
■
SLP Parameters
on page A-5
■
SSDP Parameter
on page A-5
■
NBNS (WINS) Parameters
on page A-5
■
Access Control Parameter
on page A-5
■
LPR Parameters
on page A-5
■
AppSocket (Port 9100) Parameters
on page A-5
■
IPP (Internet Printing Protocol) Parameters
on page A-6
■
SNMP Parameters
on page A-6
■
HTTP (CentreWare IS) Parameters
on page A-6
■
FTP Parameters
on page A-6
■
Status Notification Parameter
on page A-7
■
MaiLinX Remote Printing Parameters
on page A-7
Configuration Card
Parameters
