Xerox PHASER 7500, Service Manual

Page: 784 / 992

9-2 Phaser 7500 Printer Service Manual
Parts List
Serial Number Format
Changes to Xerox products are made to accommodate improved components as
they become available. It is important when ordering parts to include the following
information:
• Component's part number
• Product type or model number
• Serial Number of the printer
Note
Not all of the serial number will be used. This is a buffer in case additional
units are built by Fuji Xerox for each model of printer during pre-production.
The serial numbers are only reset to the starting serial number when the ending
serial number is reached. At that time the revision digit will be rolled. Serial
numbers below 10001 are reserved for XOG Final Integration Center (FIC) sites if
reserialization is needed.
The nine-digit serial number has the following format:
■
PPPRSSSSS
■
PPP =
Three digit alphanumeric product code
■
R =
Single digit numeric revision digit, 0~9. To be rolled when a major
product change occurs and initiated with a change request.
Product Product Code
7500, 110V Engine RXD
7500V, 220V Engine RXE
Production Units (MP Build)
PPP1SSSSS
SSSSS =
Five digit n u me r ic se r ial n u mbe r based on the following table:
Product
Starting Serial
Number
Ending Serial
Number
7500_N, 110V Engine 10001 30000
7500_DN, 110V Engine 30001 90000
7500_YDN, 110V Engine (GSA) 90001 99999
7500V_N, 220V Engine 10001 35000
7500V_DN, 220V Engine 35001 99999