Xerox Phaser 7300B, Service Manual

Page: 185 / 277

FRU Disassembly 6-169
Main Feeder Assembly (PL 6.1.6)
1.
Remove Tray 1.
2.
Remove the Rear Cover (see pg. 6-135).
3.
Remove the Right Cover (Door A) (see pg. 6-139).
4.
Disconnect the 8 wiring connectors leading to the Main Feeder Assembly. There
are 5 intermediate connectors, and 3 additional connectors that are brown, black
and red.
5.
Remove the main feeder cross brace; it is held in place with 5 screws.
6.
Remove the 4 G screws around the outer edge of the Main Feeder Assembly.
Note: Do not remove the screws from the center of the frame.
7. On the right side of the printer, remove the 2 G screws from the front of the
assembly.
8.
Reach into the printer cavity left by Tray 1 and remove the 2 screws securing the
Main Feeder Assembly.
S7300-161
Do Not
Remove