Xerox Phaser 7300B, Service Manual

Page: 183 / 277

FRU Disassembly 6-167
Tray 1 Pick and Feed Rollers (PL 6.1.2) (set of 3
interchangeable rollers),
Torque Limiter (PL 6.1.4), and
Bearing, One-Way, Feed Roller (PL6.1.3)
1.
Remove Tray 1.
2.
Reach into the cavity and release the locking tab on the front end of the feed
rollers.
3. Slide the feed rollers to the front to remove them.
Note: Note the position of the clutch on the shaft behind the
upper roller and the torque limiter on the shaft behind the
lower feed roller.
4.
Release the locking tab on the front end of the nudger roller.
5.
Slide the nudger roller to the front and remove.
1 Bearing, One-Way Feed Roller
2 Nudge Roller
3 Locking Tab
4 Feed Rollers
5 Torque Limiter
2
4
3
S7300-60
1
5