Xerox Phaser 6510 User Manual Download

Page: 78 / 236

Paper and Media

Push the tray in all the way.

If the control panel prompts you, verify the paper size and type on the screen. If not, change the

paper settings.
a.

At the printer control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

Printer Settings

, then press

To select the paper type, navigate to

Paper Type

, then press

Navigate to

Tray 1

, then press

Navigate to

Labels

, then press

To return to the Printer Settings menu, press the

Left

arrow button twice.

To select a paper-size setting, navigate to

Paper Size Settings

, then press

Navigate to

Tray 1

, then press

To select a paper-size setting, press the arrow buttons, select the setting, then press

To return the printer to Ready, press

Menu

Glossy Cardstock

You can print Cardstock and Glossy Cardstock up to 220 g/m² from any tray. For 2-Sided printing on

cardstock, refer to

Supported Paper Types and Weights for Automatic 2-Sided Printing

on page 61.

Guidelines for Printing on Glossy Cardstock

•

Do not open sealed packages of glossy cardstock until you are ready to load them into the printer.

•

Leave glossy cardstock in the original wrapper, and leave the packages in the shipping carton until

ready to use.

•

Remove all other paper from the tray before loading glossy cardstock.

•

Load only the amount of glossy cardstock you are planning to use. Do not leave glossy cardstock in

the tray when you are finished printing. Replace unused cardstock in the original wrapper and seal.

•

Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy cardstock to

curl and jam in the printer.

•

In the print driver software, select the desired glossy cardstock type or select the tray loaded with

the desired paper.

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands