Xerox Phaser 6510 User Manual Download

Page: 75 / 236

Paper and Media

If the control panel prompts you, verify the size and type on the screen. If not, change the paper

settings.
a.

At the printer control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

Printer Settings

, then press

To select the paper type, navigate to

Paper Type

, then press

Navigate to the desired tray, then press

To select the desired paper setting, press the arrow buttons, then press

To return to the Printer Settings menu, press the

Left

arrow button twice.

To select paper size, navigate to

Paper Size Settings

, then press

Navigate to the desired tray, then press

To select a paper-size setting, press the arrow buttons, select the setting, then press

To return the printer to Ready, press

Menu

Labels

You can print labels from the bypass tray or Tray 1.

Guidelines for Printing Labels

•

Use labels designed for laser printing.

•

Do not use vinyl labels.

•

Do not feed a sheet of labels through the printer more than once.

•

Do not use dry gum labels.

•

Print only on one side of the sheet of labels. Use full sheet labels only.

•

Store unused labels flat in their original packaging. Leave the sheets of labels inside the original

packaging until ready to use. Return any unused sheets of labels to the original packaging and

reseal it.

•

Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions. Storing

them in extreme conditions can cause print-quality problems or cause them to jam in the printer.

•

Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and

jam in the printer.

•

In the print driver software, select Label as the paper type.

•

Before loading labels, remove all other paper from the tray.

CAUTION:

Do not use any sheet where labels are missing, curled, or pulled away from the backing

sheet. It could damage the printer.

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands