Xerox Phaser 6510, User Manual

Page: 55 / 236

Installation and Setup
Adding the Printer
For networking, set up your printer using Bonjour (Rendezvous), or connect using the IP address of your
printer for an LPD/LPR connection. For a non-network printer, create a desktop USB connection.
To add the printer using Bonjour:
1.
From the computer Applications folder or from the dock, open System Preferences .
2. Click Printers & Scanners .
The list of printers appears on the left of the window.
3. Under the list of printers, click the plus button ( + ).
4. At the top of the window, click the Default icon.
5. Select your printer from the list, then click Add .
Note: If your printer was not detected, verify that the printer is on and that the Ethernet cable is
connected properly.
To add the printer by specifying the IP address:
1.
From the computer Applications folder or from the dock, open System Preferences .
2. Click Printers & Scanners .
The list of printers appears on the left of the window.
3. Under the list of printers, click the plus button (
+
).
4. Click
IP
.
5. From the Protocol drop-down menu, select the protocol.
6. In the Address field, enter the IP address of the printer.
7. In the Name field, enter a name for the printer.
8. From the Print Using drop-down list, choose
Select a driver to use
.
9. From the printer software list, select the print driver for your printer model.
10. Click
Add
.
For reference:
Online Support Assistant at:
www.xerox.com/office/6510support
Installing Drivers and Utilities for UNIX and Linux
For details on installing print drivers and utilities for UNIX and Linux, refer to UNIX and Linux Printing on
page 85.
Xerox
®
Phaser
®
6510 Color Printer 55
User Guide