Xerox Phaser 6510 User Manual Download

Page: 54 / 236

Installation and Setup

Installing the Drivers and Utilities for Macintosh OS X

Insert the

Software and Documentation disc

into the appropriate drive on your computer.

Open Xerox

Print Drivers 3.xx.x.dmg/.pkg as needed for your printer.

To run Xerox

Print Drivers 3.xx.x.dmg/.pkg, double-click the appropriate file name.

When prompted, click

Continue

To accept the license agreement, click

I Agree

To accept the current installation location, click

Install

, or select another location for the installation

files, then click

Install

If prompted, enter your password, then click

From the list of discovered printers, select your printer, then click

Next

If your printer does not appear in the list of discovered printers:
a.

Click the

Network Printer Icon

Type the IP address of your printer, then click

Continue

Select your printer in the list of discovered printers, then click

Continue

10.

If your printer was not detected, verify that the printer is on and that the Ethernet or USB cable is

connected properly.

11.

To accept the print queue message, click

12.

Select or clear the

Set Printer as Default

and

Print a Test Page

check boxes.

13.

Click

Continue

, then click

Close

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands