Xerox Phaser 6510 User Manual Download

Page: 47 / 236

Installation and Setup

Powering the Printer On and Off

The printer has a single multifunction button on the control panel. The Power/Wake button restarts,

powers up, or powers down the printer. This button also enters and exits low-power mode, and flashes

when the printer is in power-saver mode.

To power on the printer:

At the printer control panel, press the

Power/Wake

button.

To power off the printer:
1.

At the printer control panel, press the

Power/Wake

button.

Note:

If the printer does not respond to a single press of the

Power/Wake

button, press and hold

the button for 5 seconds. A message appears that requests you to wait for the printer to power off.

Navigate to

Power Off

, then press

After 10 seconds, the touch screen goes dark and the Power/Wake button flashes until the printer

has completed the power off process.

CAUTION:

Do not plug or unplug the power cord when the printer is powered on.

Installation Wizard

The Installation wizard starts the first time you power on the printer. The wizard prompts you with a

series of questions to help you configure basic printer settings.

Note:

You can change these settings at any time.

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands