Xerox Phaser 6510 User Manual Download

Page: 37 / 236

Installation and Setup

Connecting to a Computer Using USB

To connect using USB, you need one of these operating systems: Windows Vista, Windows 7, Windows

8.1, Windows 10, Windows Server

2008, Windows

Server

2008 R2, Windows Server 2012, or Macintosh

OS X version 10.9 or later.

To connect the printer to the computer using a USB cable:
1.

Connect the

end of a standard A/B USB 2.0 or USB 3.0 cable to the USB Port on the back of the

printer.

Connect the

end of the USB cable to the USB port on the computer.

If the Windows Found New Hardware Wizard appears, cancel it.

Install the print driver.

For reference:

Installing the Software

on page 52.

Connecting to a Wired Network

Ensure that the printer is powered off.

Attach a Category 5 or better Ethernet cable from the printer to the network or router socket.

Use

an Ethernet switch or router, and two or more Ethernet cables. Connect the computer to the

switch or router with one cable, then connect the printer to the switch or router with the second

cable. Connect to any port on the switch or router except the uplink port.

Attach the power cord, then plug in the printer and turn it on.

Set the network IP printer address, or set up the printer for automatic printer IP detection.

For reference:

Assigning the IP address of the printer

on page 48.

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands