Xerox Phaser 6510 User Manual Download

Page: 28 / 236

Features

Information Pages

Your printer has a printable set of information pages. These include configuration and font information,

demonstration pages, and more.

Printing Reports

At the control panel, press

Menu

Navigate to

Print Reports

, then press

Navigate to the desired report, then press

To print the report, at the prompt, press

To return the printer to Ready, press

Menu

Specifying the Source Tray for Printing Reports

At the printer control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

Printer Settings

, then press

Navigate to

Paper Tray Priority

, then press

Navigate to the desired paper tray, then press

To set the paper tray to the highest priority, navigate to

Priority 1

, then press

Notes:

•

To print a report, ensure that the paper tray that you selected matches match the default

paper size, type, and color.

•

The Bypass Tray cannot be set to Priority 1.

•

To print a report from the Bypass Tray, remove all the other trays, then load the default paper

size, type, and color in the Bypass Tray.

To return the printer to Ready, press

Menu

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands