Xerox Phaser 6510 User Manual Download

Page: 232 / 236

Recycling and Disposal

All Countries

If you are managing the disposal of your Xerox product, please note that the printer may contain lead,

mercury, perchlorate, and other materials whose disposal may be regulated due to environmental

considerations. The presence of these materials is fully consistent with global regulations applicable at

the time that the product was placed on the market. For recycling and disposal information, contact your

local authorities. Perchlorate Material: This product may contain one or more Perchlorate-containing

devices, such as batteries. Special handling may apply. For more information, go to

www.dtsc.ca.gov/hazardouswaste/perchlorate.

232

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands