Xerox Phaser 6510, User Manual

Page: 192 / 236

System Administrator Functions
Setting the Panel Lock
You can use Panel Lock to limit access to the menus. When Panel Lock is enabled, access to the menus
requires a password.
To set Panel Lock:
1.
At the printer control panel, press the
Menu
button.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to
Admin Menu
, then press
OK
.
3. Navigate to
System Settings
, then press
OK
.
4. Navigate to
Panel Settings
, then press
OK
.
5. Navigate to
Panel Lock
, then press
OK
.
6. Navigate to
On
, then press
OK
.
7. At the prompt, enter a numeric passcode, then press
OK
.
8. At the prompt, reenter the passcode, then press
OK
.
9. To return the printer to Ready, press
Menu
.
To change the Panel Lock passcode:
1.
At the printer control panel, press the Menu button.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Admin Menu , then press OK .
3. Navigate to System Settings , then press OK .
4. Navigate to Panel Settings , then press OK .
5. Navigate to Change Passcode , then press OK .
6. At the prompt, enter a numeric passcode, then press OK .
7. At the prompt, reenter the passcode, then press OK .
8. To return the printer to Ready, press Menu .
Enabling HTTPS Communication
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return .
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 186.
3. Click
Connectivity
>
HTTP
.
4. To enable HTTPS, click the
HTTPS (SSL)
toggle button.
Note: A check mark on the toggle button indicates that the setting is enabled.
5. Click
OK
.
6. To activate your changes, at the prompt, click
Restart Now
.
192 Xerox
®
Phaser
®
6510 Color Printer
User Guide