Xerox Phaser 6510, User Manual

Page: 179 / 236

System Administrator Functions
Setting Printer Policies
Configuring Jobs Policies
You can set policies for your print jobs. You can configure settings for Print Around, job name
concealment, and stored print jobs.
When a print job is paused or in an error state, The Print Around feature allows the subsequent jobs in
the queue to print. For example, a print job can be paused because it requires paper that is not loaded
in a tray. When Print Around is enabled, any subsequent job that requires another paper type prints
immediately, even though a preceding job is held.
Enabling Print Around
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return .
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 186.
3. Click
Jobs
>
Policies
.
4. For Print Around, click the
Enable
toggle button.
Note: A check mark on the toggle button indicates that the feature is enabled.
5. Click
OK
.
6. Click
Restart Now
.
Concealing or Showing Job Names
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return .
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 186.
3. Click
Jobs
.
4. Click
Policies
.
5. For Conceal Job Names, select an option.
6. Click
OK
.
7. Click
Restart Now
.
Xerox
®
Phaser
®
6510 Color Printer 179
User Guide