Xerox Phaser 6510 User Manual Download

Page: 172 / 236

System Administrator Functions

Configuring Audio Tones

At the printer control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

System Settings

, then press

Navigate to

Audio Tones

, then press

To enable tones:
a.

Navigate to

All

, then press

Navigate to

, then press

To set the volume for a specific tone:
a.

Navigate to the tone that you want to configure, then press

To increase or decrease the volume, use the arrows, then press

To return the printer to Ready, press

Menu

Configuring the Panel Timeout

The panel timeout allows you to set the delay before the control panel times out.
1.

At the printer control panel, press the

Menu

button.

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

System Settings

, then press

Navigate to

Auto Clear

, then press

To select a setting, press the arrow buttons, select it, then press

Configuring Printer Settings

You can use this menu to configure general settings for the printer, such as default paper size, tray

priority, and output settings.

Setting the Default Paper Size

If needed, log in as administrator.

At the printer control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

Printer Settings

, then press

Navigate to

Default Paper Size

, then press

Navigate to the desired size, then press

To return the printer to Ready, press

Menu

172

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands