Xerox Phaser 6510 User Manual Download

Page: 162 / 236

System Administrator Functions

Cloning Printer Settings

You can use cloning to copy configuration settings from one printer to another printer on the same

network.

Note:

Before using the clone feature, ensure that the source printer clone file is compatible with the

destination printer.

To clone the printer settings:
1.

At your computer, open a Web browser. In the address field, type the IP address of the printer, then

press

Enter

Return

In the Embedded Web Server, log in as a system administrator. For details, refer to

Logging In as

the Administrator

on page 186.

At the bottom of the Home page, click

Cloning

To install a clone file:
a.

For Install Clone File, click

Select

Locate, then select a clone file from the source printer, then click

Open

•

To select a different clone file, click the change file icon.

•

To remove the selected clone file, click the

Trash

icon.

Note:

Removing the clone file does not delete it from the computer.

To install the selected clone file, click

Install

To create a clone file:
a.

Select the parameters to clone from this printer.

•

To select individual parameters to clone from this printer, select the desired parameter.

•

To choose all settings, select

Select/Clear All

•

To clear all settings, clear

Select/Clear All

Click

Create

If prompted, save the clone file to a location that you can remember easily when you need the

file for installation.

Note:

If you are not prompted to save the file, look for it in the Downloads folder on your computer.

When you are finished creating or installing a clone file, click

Close

162

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands