Xerox Phaser 6510 User Manual Download

Page: 115 / 236

Maintenance

Adjusting the Altitude

Use Adjust Altitude to adjust the altitude to match that of the location where the printer is installed.

the altitude setting is incorrect, it can cause print-quality problems.

To adjust the altitude:
1.

At the printer control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

Image Quality

, then press

Navigate to

Altitude Adjustmt

, then press

To select the altitude of the location of the printer, press the arrow buttons, then press

To return the printer to Ready, press

Menu

Performing an Engine Cleaning Procedure

When a printer sits idle for an extended time, it can result in visible background toner on prints.

The

Engine Cleaning procedure is used to reduce background toner on prints.

To perform an engine cleaning procedure:
1.

At the printer control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

Engine Cleaning

, then press

At the prompt, press

When the process is complete, the printer displays

Cleaning is finished

To return the printer to Ready, press

Menu

Xerox

Phaser

6510 Color Printer 115

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands