5-42
Xerox Internal Use Only
Phaser 6500/WorkCentre 6505 Service Manual
Print-Quality Troubleshooting
Spots from ADF
There are spots on copies from the ADF.
Initial Actions
•
Check the document glass.
•
Ensure there are no debris on the document glass.
Troubleshooting Reference Table
Applicable Parts
Example Print
ADF Scanner Assembly, PL11.1.1
Troubleshooting Procedure
Step
Actions and Questions
Yes
No
1
1. Check the original document.
2. Are there spots on the original
document?
Replace the
original
document.
Go to step 2.
2
1. Check for any debris on the
document glass and the CVT
window.
2. Are there any debris?
Remove the
debris and
clean the
document glass
using a lint-free
cloth.
Go to step 3.
3
Does the image quality improve?
Complete.
Replace the IIT
Sub-Assembly
(page 8-195).
Spots on Glass
