Xerox Phaser 6280, Service Manual

Page: 425 / 672

Phaser 6280 Color Laser Printer Service Manual 5-51
Print-Quality Troubleshooting
Damaged Paper
Paper comes out from the printer wrinkled, folded, or worn-out.
Initial Actions
■
Check the paper transfer path.
■
Ensure there are no debris on the transfer path.
Warning
Ensure to wait for the Fuser to cool down before starting the procedure.
Troubleshooting Reference Table
Applicable Notes Example Print
■
MPT Retard (Separator) Roll,
PL2.1.7
■
Tray 2 Retard Roll, PL2.2.17
■
MPT Feed Roll, PL3.1.10
■
Feeder Assembly, PL3.2.1
■
Feed Roll, PL3.2.53
■
Fuser Assembly, PL5.1.10
■
Duplex Unit, PL11.1.1
■
Tray 3 Feed Roll (Nudger Roll),
PL12.3.29
■
Tray 3 Retard Roll, PL12.5.17
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1. Check the paper condition.
2. Is the paper dry, recommended
type, and loaded in the correct
position?
Go to step 2. Replace the
paper.
2 1. Check the Front Cover Latch. Open
and close the Front Cover.
2. Does the error still occur?
Go to step 3. Complete.
3 1. Check the Transfer Unit for correct
installation. Reseat the Transfer Unit
(page 8-8).
2. Does the error still occur?
Go to step 4. Complete.
Damaged Print Media