manualshive.com logo in svg

Xerox Phaser 6180, Service Manual, Page: 597 / 616

Share
Download
Xerox Phaser 6180 Service Manual Download Page 597

Phaser 6180 Color Laser Printer Service Manual

A-3

Reference

Firmware Update

Boot Controller Update

Note

Boot Code can be updated via USB or Parallel port only.

1.

Down load applicable files from the Xerox support web site.

2.

Turn off the printer.

3.

Ensure your appropriate downloading cable option (USB or Parallel) is 
connected.

4.

Press the 

Up Arrow

, 

Down Arrow

, and 

Menu

 buttons simultaneously 

and turn on the printer.

5.

The 

FW Update Password

 is displayed.

6.

Press the 

Down Arrow

 button 2 times.

7.

Press the 

OK

 button.

8.

The 

F/W Download

 is displayed.

9.

Select the appropriate method (

DL Mode Parallel

 or 

DL Mode USB

). 

Press the 

OK

 button.

10.

The serial number of the printer is displayed. Then the 

DownLoad Mode 

Send F/W Data

 is displayed.

11.

On your computer, locate the downloaded file. Open the 

Boot

 directory. 

Double-click the 

Xeroxfwup.exe

 file.

12.

Select the appropriate method (

USB

 or 

Parallel

). Click the 

Next

 button.

13.

The 

xeroxfwup

 window with the module number is displayed. Click the 

Next

 button.

14.

On the printer Control Panel, the 

Erasing Flash...

 --> 

Diagnosing

 

message is displayed. The the printer starts updating the firmware.

Caution

Do Not reboot or turn off the printer. The printer will automatically reboot.

12.

When the process is completed, the following messages are displayed on 
the printer Control Panel.

■

Xerox (TM) Print Cartridge

■

Processing... Ready

13.

Print the printer Configuration page (

Menu

 > 

Information Pgs

 > 

Configuration

) and verify the Boot Version information.

Summary of Contents for Phaser 6180









































































































































































































































































































































































































































































































































































































































Reviews:

No comments