Xerox Phaser 6128 MFP Service Manual Download Page 510

Page: 510 / 606

8-86

Phaser 6128MFP Service Manual

Service Parts Disassembly

Xerographics

Erase LED Assembly

(PL4.1.8)

1. Open the Front Cover.

2. Remove the Left Side Cover (page 8-17).

3. Remove the Rear Cover (page 8-22).

4. Remove the Right Side Cover (page 8-23).

5. Remove the two screws (silver, tap, 8mm) that secure the Erase LED Assembly

to the chassis.

6. Remove the Erase LED Assembly from the printer.

7. Unplug the connector (P/J141) of the Erase LED Assembly.

s6128mfp-285

P/J141

Summary of Contents for Phaser 6128 MFP






























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Phaser 6128 MFP

Reviews:

Brands by name

Popular brands

Xerox Phaser 6128 MFP, Service Manual

Search results

Summary of Contents for Phaser 6128 MFP

Reviews:

Brands by name

Popular brands