Xerox Phaser 6128 MFP, Service Manual

Page: 298 / 606

4-28 Phaser 6128MFP Service Manual
General Troubleshooting
Print Settings
■
Ready
■
Processing
Prints the configured settings
through the Control Panel.
The Print Settings page contains:
■
Serial No.
■
HexDump On/Off Information
■
Tone Correction On/Off
Information
■
Color Print Count
■
B/W Print Count
■
Total Print Count
■
Color Backup Count
■
B/W Backup Count
■
Total Backup Count
■
Color Error Count
■
B/W Error Count
Installation Provides printer installation information.
Serial No.
■
HATxxxxxx
or
■
HARxxxxxx
Displays the 6 digit Serial Number.
This value is read-only.
Tone
Correction Tone Correction
■
ON *
■
OFF
Controls TRC in conjunction with
process control to keep density
constant. Turn Off tone correction
when correction exceeds the limit
due to machine-to-machine
variation. Sets the printer Tone
Correction mode On/Off.
NOTE: Note:
When the Tone Correction
has been changed, an “*” is displayed
next to the text.
Display
Counter Not used in this printer.
Hex Dump
■
OFF *
■
ON
Sets HexDump On/Off. Used to
analyze received data in case of an
error. Setting Hex Dump to On
enables printing of received data via
[Info Page] under [Print info].
Pixel Counter
■
Y: nn.n
■
C: nn.n
■
M: nn.n
■
K: nn.n
Displays the ratio (% used) of the
number of pixel per C/M/Y/K counted
by the Controller to A4 size area
except 4 mm area from the edge on
the last page print.
■
100% = empty Toner Cartridge
The value is rounded off to one
decimal place.
For B/W print, only K is displayed.
The ranges are from 0-100% for
each color (CMYK).
Configuration Not used in this printer.
Counter Type Not used in this printer.
Print Counter Numeric counts of activity.
Test Control Panel Display Test Description